Tools

Includes Tool Frame, 4, 5, 6, Hex Bits and #2 jis Phillips Screwdriver Bit

The Abbey Bike Tools 4-way precision multi-tool is the perfect choice to carry with you while on a ride. We designed this beautiful green anodized tool to fit into a compact saddle bag, riding wallet, or tuck into a jersey pocket.

This bottom bracket socket is for use on BSA30 12-notch bottom brackets, such as SRAM DUB, Rotor, Race Face Cinch, and many others that use this common tool interface. Made with the same top-shelf aluminum alloy to the same exacting fit and tolerance as the rest of our socket range, these sockets won't chew up your shiny new bottom bracket.

Compatible with bearing inside diameters from 12 to 20mm and outside diameter 24 to 37mm

Compatible with ½” X ½” rear shock bushings

While most other manufacturers cast or forge their bottom bracket tools, we machine ours for greater precision. Whenever you're dealing with anodized surfaces, great care needs to be taken to keep those surfaces from getting marred, gouged, and stripped out. That can be nearly impossible with some spanner style tools, and difficult with other loose-fitting sockets. The most unique feature about this tool is the inner nub; that nub in the center of the tool is the same size as the crank spindle. What this does is give you a second point of contact that keeps the tool from coming off of the part when trying to remove stubborn cups. This dual sided socket is designed to work with the new Shimano DA-9000/XTR-BB93 bottom bracket as well 6800 Ultegra and 5800 105 11spd groups (BBR-60).

The Crombie tool is a game changer when it comes to swapping cassettes. Whether you're a professional mechanic swapping cassettes several times a day or a DIY kind of guy, this gem has a place on your tool bench. The first time a quick release spring rolls under your bench the Crombie tool paid for itself. If you like to remove the cassette for a detailed cleaning or just swapping from one cassette to another, it's a big time saver and a breeze to use. This version of the tool has a Shimano/SRAM remover on one side with a Campagnolo on the other. A precision machined spline ensures maximum engagement and durability. The STANDARD version comes with a solid handle which gives the tool some mass making it the preferred choice in the shop. The SUPER LIGHT version shaves 125 grams out of the handle. SL handles are plenty durable for lockrings that are torqued close to the 40 NM spec. If you commonly come across over torque lockrings get the standard handle!

- Specifically designed kits to drive seals straight when servicing forks - Each set includes an Abbey green fork seal press constructed from stainless steel for excellent durability when paired with a mallet - Built using Delrin to eliminate scarring on delicate parts - Drivers are made in diameters specific to stanchion sizes for most modern forks including 32, 34, 35, 36, 38, and 40mm - Made in the USA: Bend, Oregon

- Half precision measuring instrument and half pry bar, this tool will keep your hanger in line
- Features a lock in the feeler so you don't have to second guess your measurement after bumping it on the tire
- Top half will rotate out of the way of fender stays and frame tubes for easy use
- Feeler stores inside the top half of the tool for transport
- Compatible with the three most common wheel sizes including 26, 27.5/650B, and 700/29
- Abbey Tools are priced to be used as shop tools, not for resale
- Made in the USA: Bend, Oregon

- A CNC machined chain wear tool that is compatible with most chains including SRAM flat top chains
- Measures from the center of the chain roller for an accurate output instead of the side of the chain
- Also able to measure the lateral wear/play of a chain which is common in 1x drivetrains due to the extreme angles
- Compatible with all chains
- Abbey Tools are priced to be used as shop tools, not for resale
- Made in the USA: Bend, Oregon

- A unique tool that works in conjunction with the Abbey Tool HAG to set brake and shifter levers at the same height from side to side
- Tool temporarily replaces the headset top cap and allows you to thread a hanger alignment tool into the lever setter allowing for the use of the HAG indicator to set levers the same from one side of the bar to the other
- Great fitting tool
- Abbey Tools are priced to be used as shop tools, not for resale
- Made in the USA: Bend, Oregon

- A simple tool that is meant to gauge derailleur hanger alignment without having to remove the rear wheel
- Presses onto largest cog on bike to quickly provide a reference to judge if further attention is needed
- Abbey Tools are priced to be used as shop tools, not for resale
- Made in the USA: Bend, Oregon

This dedicated socket is built to engage all 4 of the holes on a SRAM dub crank arm dust cap. These caps don't normally need to be removed but when you do need to work with them, few things work well. These tools feature a common 3/8" square drive like the rest of our socket range and also have a hexagonal exterior so you can mount them in a vise and use the crank arm as the lever if so desired. The sockets are also marked for the left hand thread (clockwise to loosen) this part uses. Compatible with all SRAM dub cranks, road/mountain/gravel.

Compatible with 1" and 1.125" steer tubes and all handlebars

These gems are machined to precisely fit the preload adjuster cap on all modern 24mm spindle Shimano cranks. The finger spline offers good leverage to install, remove, or adjust the preload cap. We also added a 5mm hex in the center should you need a little extra leverage that a hex key provides. These are also compatible with our fit kits and with the addition of a saddle height bullet can be used to more accurately measure saddle height.

Compatible with all Shimano and SRAM thru axle and quick release hub/cassettes

Compatible with 3.23mm/.127" spoke nipples

- The Shop Hammer has a heat treated 1.5" (38mm) stainless steel head and 12" long handle with the same silicone grip from ESI as our Team Issue Hammer
- Weighs 20oz
- Replacement face plates available through Abbey Tools direct
- Abbey Tools are priced to be used as shop tools, not for resale
- Made in the USA: Bend, Oregon

Compatible with 6, 8, and 15mm pedals

Compatible with 7 to 13 speed cassettes from all manufactures

This tool is compatible with all outboard bearing cups that our dual-sided Shimano socket doesn't fit, including Campagnolo, SRAM, FSA, and older Shimano. These gems start as a 7075 aluminum billet and get precisely machined. We take the time to put some nice deep finger splines in this tool so you can thread the cup into the frame by hand with those greasy fingers you haven't washed in a while. - Hard anodized and laser-engraved with torque specs. - Use your favorite 3/8" square drive ratchet or torque wrench to tighten it down.

Compatible with all modern Shimano and SRAM cassettes

Compatible with 1 and 1.25" steerer tubes

Compatible with various rotors and beers

Suspension service is a specialty within bicycle repair, and it takes specialized tools to perform this work. One of the things that any factory tech will tell you is nice to have are sockets specifically made or altered for the low profile hex on the top of each fork leg. The lead-in or chamfer on a standard socket will greatly decrease the contact between tool and part and can easily scratch or deform those nuts. For years shops have been grinding down their sockets to remove the chamfer. The problem is that you're still often left with a loose-fitting socket that is still prone to chewing up those delicate parts. That's why we started from scratch. We made our sockets from billet aluminum to exacting tolerances to keep these parts in good shape. Fully CNC-machined with zero lead-in, they make the specialty that is suspension service a little bit easier. They feature a 3/8" square drive for use with your favorite torque wrench as well as finger splines to help run the top caps into the fork legs with those oil soaked hands. We also kept them short (1" or 25mm for all sizes) to reduce the chance of them slipping off of the top cap under torque. - Made from billet aluminum to exacting tolerances to keep form damaging the suspension - Finger splines so you can thread it easily by hand - 3/8" square drive - Short (1"/25mm for all sizes) to reduce the chance of them coming off of the top cap under torque - Made in Bend, Oregon Applications - 24mm socket - used on SRAM top caps - 26mm socket - used on Marzocchi and Reverb sealheads - 27mm socket - used on Fox and X-Fusion top caps - 30mm socket - used on the RS-1 SRAM sealhead removal tool as well as a handful of other forks. - 6-size set covers most modern suspension forks on the market: 24, 26, 27, 28, 30 and 32mm

- A turnkey tool kit that has enough tools to get you through a weekend adventure. Includes almost everything you need with a little extra room for odd spares and custom tools
- Starts with a Nanuk case with subtle graphics on the shell to protect the goods while providing easy transport. Next are 3 layers of XLPL foam custom cut to keep tools organized, safe and secure and even includes a small parts box. The bottom layer gives you a couple options: use the large cutouts to store a bleed kit, lube, thread retainers or use the included foam to further customize the kit to build your perfect toolbox
- See the Abbey Tool website for complete list of tools
- Abbey Tools are priced to be used as shop tools, not for resale
- Made in the USA: Bend, Oregon

With thru axles becoming more and more common, the original Crombie tool was due for a makeover. We took the piloting pin and plus-sized it to work with the 12mm thru axle fitment that is actually standardized. We make this version as a dual-sided tool with two S Group ends, one for thru axle wheels and the other for regular hubs. The regular side has a hole deep enough to hide a skewer nut; it's really the best of both worlds. - Comes with a solid handle - Note: this version of the Crombie tool is not compatible with any Campagnolo wheels. - Dimensions: 9.625in x 1.0in

The Whip-It maximizes function and simplicity. Made from a 12-inch length of stainless steel, it gives you enough leverage to loosen even the most stubborn cassettes. The Whip-It's round handle provides comfort surpassing other flatbar-style chain whips on the market. The icing on the cake is that Abbey's signature tool, the Crombie, stores inside the handle of the Whip-It; this means the two tools you use together get stored together and travel together, creating less clutter in your tool box.

Compatible with Shimano mountain bike drivetrains featuring a 9 tooth final cog as well as the traditional Shimano thru axle